The construction of the MoveMaster C-AF conveyor is adjusted to the specific properties of alternative fuels, as well as to specific requirements of alt fuels transport, but the conveyor may also be used for other material with bulk density up to 700 kg / m3.The conveyor is supplied in straight or “L” and “Z” versions. The length of the conveyor track is up to 40 m. The conveyors are equipped with forged chains with high strength and large contact areas ensuring low wear and tear of guide rails.

The Tiger PS1000 with its advanced control system; allowing the operator to control virtually every aspect of this concrete products machine, from compression pressure, to vibration and everything in between. Advanced graphic monitoring puts you in control of your density, as well as your destiny!

The Tiger PS1000 with its advanced control system; allowing the operator to control virtually every aspect of this concrete products machine, from compression pressure, to vibration and everything in between. Advanced graphic monitoring puts you in control of your density, as well as your destiny!

Our size reduction crush testing equipment is available for your products, whether you are interested in testing or in our full service toll grinding services facility.Just minutes from the Cincinnati/Northern Kentucky International Airport, it is perfect for one day testing visits. Highly trained and experienced technicians guide you through the testing processes with your material to help determine which equipment is best for your needs.Impact Crushing MethodLearn the basics of controlled impact crushing, pulverizing or upgrading of your material. See how we prepare and load your material and set RPMs for fine to coarse production. Watch real time horsepower consumption through start up and full load. You will see our crusher testing process personally and receive your end product on site with a confidential, written report including:Moisture analysisRaw feed gradation analysisProduct gradation analysisBulk densityAbrasion testEstimated metal replacement costsPower requirements for startup and operationTest Crushing MachineryWe provide assurance that you are buying the right equipment for the job. Stedman offers the following crusher testing machines to test your products:Grand-SlamTM HSI ImpactorH-SeriesTM Multi-Row Cage Mill PulverizerV-SlamTM VSI ImpactorMicro-MaxTM Fine Grind Air Swept MillAuroraTM Dual Rotor CrusherHammer Mill

Stedman Size Reduction Test Lab, Testing Materials From A-Z, Featuring Full-Size Crushing Equipment for Dependable Results. Stedman's unique test lab assures you're buying the right equipment for the job. Our highly-trained and experienced technicians will test your materials on full-size equipment. The Stedman testing program gives you the information you need to select the right crushing and size reduction equipment. Grand Slam™ Impactor, The Stedman 30" x 30" Grand Slam tests secondary and tertiary applications. Gap settings and rotor speeds for specific particle size gradation can be determined. H-Series™ Multi-Row Cage Mill Pulverizer, A wide variety of 2, 4 and 6 row cage designs with a complete range of sleeve/pin spacings. V-Slam™ Impactor, Designed for size reduction of minerals, ores and chemicals. Micro-Max™ Fine Grind Air Swept Mill , Screenless mill capable of producing a wide range of particle sizes. Liquid injection ports standard for grinding heat sensitive materials, or by adding heat capable of grinding and drying in one pass. Aurora™ Single or Dual Rotor Crusher , Designed for higher throughput and smaller particles. Ideal when delumping for pneumatic conveying or unloading. Complete Analysis From Experienced Professionals , The quality data produced from the test of your material helps you estimate operating costs from power consump­tion to wear parts. The written technical report provided to you includes: • Moisture content analysis • Gilson screening of raw feed particle size distribution • Product particle size distribution • Bulk density analysis • Abrasion test results • Estimated metal replacement costs • Horsepower consumption

The primary benefit from the TITAN emulsion technology is being able to note on the post blast reports that no postblast NOx fumes were present. Additional benefits include increased water resistance, increased actual energy yield verses theoretical value, increased product sensitivity resulting in high order detonation, ability to control density, redistribution of energy, increased detonation pressure, same cost per loaded foot, greater fragmentation versus cast movement, and allowing emulsion to be loaded to a lower density in highwall row resulting in the same pounds stretched to a greater height. Success measurements in the overburden truck/shovel blasts included consistent productivity (bucket fill times and bucket volumes) even in harder material located below the sandy strata, reduced post blast NOx fumes based on fume classification chart, few shovel operator complaints, and equal or reduced drill and blast budget. Seventeen blasts were completed without NOx fumes. The pounds per loaded foot was reduced from 51.5 with 40/60 HANFO to 43.1-47.1 range loading TITAN XL 1000. The average difference lbs/ft = 12.36% when 7.6% was needed for cost neutral. Stemming height was reduced from 22 ft to 20 feet to improve surface material displacement. Success measurements in the coal blasts included no roll crusher plugs from slabs, improved shovel production through uniform fragmentation, and equal or reduced drill and blast budget. Ten blasts were completed over afive-week period with no post blast fumes. There was good material movement, uniform fragmentation and generally no complaints or negative comments from shovel operators. Average difference lbs/ft = 11.98% when 4.5% was needed for cost neutral. Pounds per loaded foot averaged 45.33 compared to 51.5 with HANFO.

The cut size can be varied over a broad size range, while density sorting of light weight contaminants from sand or silica sand from heavy minerals is feasible. The HYDROSORT™ consistently produces high quality, spec sand from variable quality raw material.

Using Differential Energy, Dyno Nobel was able to reduce the number of boulders at a quarry without adding more blast holes.

What would it mean to your process if the variation in your key process variables could be cut in half? For example, consider greatly reduced variation in: • Leach circuit pH. • Thickener flocculant concentration. • CIL circuit cyanide concentration. • Cyclone feed density. Do your operators know if variation is random or non-random? If your operators were more familiar with the process control methodology, would it make a difference? What would be the result if your operators could troubleshoot and optimize each process control loop? At Performance Associates International (PAI) we believe that if the process variables in the plant are controlled at or very near their individual target ranges, the plant should be operating at near optimal efficiency. This translates into the lowest operating cost per unit production. This white paper describes how PAI approaches this component of training for your specific plant. We train on your process variables, their target ranges, the method of controlling those process variables, as well as the impact on the process if the process variables are not properly controlled.

The AZFAB Super Cutter Hydrocyclone is the answer to many serious material problems with no moving parts. The Hydrocyclone uses centrifugal force alone to separate material by size and density. The all steel construction and internal lining of 1/2 inch thick 40 durometer natural rubber means a long service life. It comes in multiple models with capacities ranging from 400 to 3000 gallons per minute of water and solids.

The new Anglo Grosvenor mine has aggressive production ramp up requirements. Therefore, the introduction of the longwall gate road entry driver machines at Grosvenor needed to be flawless. Anglo American needed an entry driver at Grosvenor that could deliver the high productivity of the Joy Global continuous cut and bolt machines in the U.S., while also meeting the challenges of the greater roof support density requirements in Australia without compromising safety and productivity. “With the Grosvenor Mine being a major new project for Anglo, and facing the head winds of a tough coal market, we have high expectations on Joy Global’s entry development equipment,” said Glen Britton, head of underground operations for Anglo American Coal.